Skip to main content
1973 Jaguar Series 3 E-Type V12
VIEW PROJECT IMAGES

Start your restoration journey with us today

The Project

This Series 3 E-Type came to us for a full restoration. As you can see it was in a bit of a state with a cracked windscreen, damaged hood, rust, and numerous dents all over the bodywork. Its original Heather paint (a colour only offered in 1973) with matching interior.

The restoration took 12 months from start to finish, so take a look through different stages of the project below.

Bodywork and engine begin to be stripped down and parts documented for repair, or replacement.

  • Strip One: We have taken off all the front bodywork. You can now appreciate the size of the massive V12 engine.
  • Strip Two: All flooring and lining inside the cabin is removed.
  • Strip Three: The engine is out! And the front suspension and steering is off. Just the rear subframe to go.
  • Strip Four: Now the shell is ready to be loaded onto the lorry and taken away for acid dipping.
  • Strip Five: Here is the whole rear subframe assembly looking very rusty and showing its age. We’re sending all the bits off to be gently blasted back to bare metal and then straight back here for a generous coat of black Novol paint to keep them looking great for years to come.

The E-Type shell has now come back fully cleaned and has been given a coat of primer to protect it. We’ve mounted the shell on our jig to make sure everything stays completely square.

There is plenty to do, a couple of rotted rear suspension pick up points to replace, plenty of rusty floor and inner sills to repair. We are busy fabricating new parts to replace the rusty ones. Once it is done new outer sills will go on.

We are also fitting new door skins. Then once the bodywork is done and the shell goes into the spray booth we will start work on the engine.

The E-Type bodyshell is really taking shape now.

After we carried out all the structural repair work to rear suspension mounting points and rust repairs behind the sills, we welded the new sills in place.

We have fitted the new door skins and got the shut lines right all the way round. The chrome trim is also fitted on both doors and matches the screen surround.

The bonnet has been fitted together. The main bonnet panel has had all the louvres carefully realigned and is now fitted to a new under panel with two new wings.

The whole bonnet has been carefully aligned with all the internal panels and then carefully shimmed at the pivot points to get the bonnet shut lines right.

Next steps are to weld the brackets for the grill and get the headlight surrounds in place. After final check over it will be ready to head to the paint shop for the start of the panel preparation work.

Whilst plastic body fillers have come a long way since its arrival in the 50’s there are still some jobs that are best done the good old-fashioned way, which is why our V12 E-Type panels are being lead loaded.

We have also resprayed the fuel tank, rear suspension and various other parts in-house.

This is the first stage of preparation for painting.

The wheel arch repair panel has been welded in. This was difficult as it is a double thickness panel, so it cannot be welded from behind. The repair panel was ’stepped’ so it can be welded in place from the outside only. Lead has then been added as a waterproof filler.

Both sides of the car are then sanded to bare metal in preparation for the epoxy primer.

Now that the E-Type shell has been sprayed in epoxy primer it is ready for the next stage.

The car is now painstakingly flatted and filled to make sure all panels are exactly the right shape, and all panel gaps are correct. This is the most time-consuming part of the shell preparation.

The time spent now means that the finished shell will look amazing when it is finally painted.

All the bodywork and doors have now been sprayed in gun metal grey, so picked a bright Barnard Castle day to really show of the work that has been put in to get this E-Type to this stage.

I think you’ll agree, that the finish of the paint is just magnificent.

Rear suspension is being built up and the recommissioning of the dashboard is underway.

Various parts of the engine and transmission have also arrived back into the workshop after being machined, repaired and painted.

Lots of work by our engineers to the front section with more pipework added including break vacuum pipes and vacuum tank.

  • Fully rebuilt heater with new heater matrix.
  • Doors have been put on and built up, just inner cards to be added next.
  • Interior sill trim and chrome work has also begun, with the gorgeous red leather seat covers added.
  • Engine built up and is now running. One or two issues to rectify with fuel flow. 
  • Front and back wheel axles fitted with suspension, breaks also fitted. 
  • Windscreen and hood fitted but need to be adjusted to fit with doors and hood tension corrected.
  • Various chrome work now fitted including back bumper and various trim.
  • Bonnet all built up and sprayed.
  • Exterior has begun to be re-assembled, including all panels/doors, handles, chrome work, wheels/tyres, canvas convertible roof and bonnet fitted.
  • Mechanical: Engine, exhaust system, suspension, breaks, and electrics are being fitted.
  • Interior: Seats have been reupholstered, door cards installed, headliner and flooring carpets fitted, and finally the boot has been lined with beige leather.

12-months ago we dragged this 1973 Jaguar E-Type V12 out a barn, now it’s fully restored and has been reunited with its owner after a full nut and bolt restoration at Carrosserie.

1973 Jaguar Series 3 E-Type V12 | Classic Car Restoration | Carrosserie
Karen Innes
Friendly, helpful, extremely knowledgeable, patient enough to explain the processes and reasons for doing things and highlighted even more how approachable the team are. They tried to accommodate our needs and requests to get our beloved old riley back on the road as soon as possible despite the ups and downs that were thrown our way and into the teams path! We could not have wished to deal with a more personable company after encountering some other teams that really made a botch of stuff, seemed uncommitted and were not professional at all. Carrosserie as a team were totally the opposite . . would we recommend them ? ABSOLUTELY !!! We would not go anywhere else now, THANK YOU TO Steve, Neil, Graham and Nicola . . Oh and Karen who spilled the beans about the the birthday surprised to my partner (whose car it is ) . but made the experience all the more special when a bottle of wine was presented as well as a treat to Simon for his birthday AND made it all the more worth dealing with the team ! THANK YOU AGAIN !!!
Graeme Phillips
My car was the subject of some body and paint repairs here in Spring 2024, to address corrosion plus some substandard paintwork. An annual service was also carried out. There was good responsive communications, advice, and attention to detail throughout, to ensure a high quality, durable result, with the final paintwork being indistinguishable from factory finish, and easily better than any franchised dealership repairs. If you are invested in your classic car, want to make it last, with an exemplary finish to be proud of, then you need look no further.
Steve
I can't recommend Carrosserie highly enough, the service was exemplary from start to finish and the workmanship is second to none. I highly recommend giving the team a call for any work you need doing to your classic car, no matter what it is, you will not be disappointed!

3rd - 13th September 2021

15th October 2021

14th December 2021

11th January 2022

27th January 2022

8th February – 2nd March 2022

22nd March 2022

13th - 27th April 2022

24th May 2022

21st June 2022

14th July 2022

4th August 2022

Are you ready to start your restoration journey with us?

Sign up to stay informed about our latest restoration projects, industry news and more

By signing up, you agree to Bidding Classics Privacy Policy